Cisco ONS 15454 Hardware Installation Manual page 43

Preparing to Install the ONS 15454 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
User
Supplied
Material
Cleaning
Cassette
Connectors
Crimp tool
Fuse and
Alarm panel
Jumper
Labels
ONS 15454
ETSI
• Copper ground cable
13.3-mm² (#6 AWG)
stranded, specified for up to
90 degrees Celsius (194
degrees Fahrenheit)
• Alarm cable pairs for all
alarm connections, 0.51 mm²
or 0.64 mm² (#22 or #24
AWG), solid-tinned
• Coaxial cable terminated
with 1.0/2.3 miniature coax
connectors for FMEC cards
• DB-37 cable
• Shielded BITS clock coaxial
cable terminated with 1.0/2.3
miniature coax connectors
CLETOP cleaning cassette
ANSI
Listed pressure terminal
connectors such as ring and fork
types; connectors must be suitable
for #10 AWG copper conductors
Crimping tool—This tool must be
large enough to accommodate the
girth of the grounding lug when
you crimp the grounding cable
into the lug
ANSI
Fuse panel
ETSI
Fuse and alarm panel
Single-mode SC fiber jumpers
with UPC polish (55 dB or better)
for optical (OC-N) cards
Labels
ONS 15454 M2
CLETOP cleaning cassette
ANSI
Listed pressure terminal
connectors dual-hole lug for
#8 AWG copper conductors
Crimping tool—This tool
must be large enough to
accommodate the girth of the
grounding lug when you
crimp the grounding cable
into the lug
Fuse panel
Single-mode SC fiber
jumpers with UPC polish (55
dB or better) for optical
(OC-N) cards
Labels
Cisco ONS 15454 Hardware Installation Guide
User Supplied Materials
ONS 15454 M6
CLETOP cleaning cassette
ANSI
Listed pressure terminal
connectors dual-hole lug for
#8 AWG copper conductors
Crimping tool—This tool
must be large enough to
accommodate the girth of the
grounding lug when you
crimp the grounding cable
into the lug
ANSI
Fuse panel
ETSI
Fuse and alarm panel
Single-mode SC fiber
jumpers with UPC polish (55
dB or better) for optical
(OC-N) cards
Labels
13