Cisco ONS 15454 Hardware Installation Manual page 122
Hide thumbs
Also See for ONS 15454:
- Troubleshooting manual (107 pages) ,
- Manual (88 pages) ,
- Procedure manual (62 pages)
Table of Contents
Advertisement
NTP-G9 Install the Alarm Expansion Panel (ANSI Only)
Figure 49: Replace Backplane Screws with Standoffs
Step 2
Attach the remaining two standoffs on either side of the backplane as shown in the following figure.
Step 3
Position the AEP board over the standoffs.
Cisco ONS 15454 Hardware Installation Guide
92
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Advertisement
Table of Contents
