NTP-G266 Install the ONS 15454 M2 Shelf
Note
During installation, do not use the door to handle the chassis.
Note
Remove the door from the ONS 15454 M2 shelf and reinstall it after installation of all the other modules is
complete.
Procedure
Step 1
Complete the necessary task as applicable:
•
DLP-G582 Mounting the 19-inch Brackets on the ONS 15454 M2 Shelf for ANSI Rack Configuration,
on page 197
•
DLP-G583 Mounting the 23-inch Brackets on the ONS 15454 M2 Shelf for ANSI Rack Configuration,
on page 198
•
DLP-G584 Mounting the Bracket with Air Deflectors (Front-to-Back) on the ONS 15454 M2 Shelf for
ANSI Rack Configuration , on page 199
•
DLP-G585 Mounting the Brackets on the ONS 1545 M2 Shelf for ETSI Rack Configuration, on page
202
•
DLP-G586 Mounting the Air Deflectors (Front-to-Front) on the ONS 15454 M2 Shelf for ETSI Rack
Configuration, on page 203
•
DLP-G587 Mounting the Bracket with Air Deflectors (Front-to-Back) on the ONS 15454 M2 Shelf for
ETSI Rack Configuration, on page 205
•
DLP-G588 Mounting the Bracket with Air Deflectors (Front-to-Top) on the ONS 15454 M2 Shelf for
ETSI Rack Configuration, on page 208
Step 2
Complete the necessary mounting task as applicable:
•
DLP-G589 Mount the ONS 15454 M2 Shelf on a Rack (One Person), on page
•
DLP-G590 Mount the ONS 15454 M2 Shelf on the Wall, on page 211
•
DLP-G591 Mount the ONS 15454 M2 Shelf on the Desktop, on page 214
Step 3
Connect the chassis to the office ground. For detailed instructions on how to ground the chassis, refer to the
Electrostatic Discharge and Grounding Guide for Cisco CPT and Cisco ONS
Step 4
Continue with
Stop. You have completed this procedure.
Cisco ONS 15454 Hardware Installation Guide
196
NTP-G270 Open and Remove the Standard Door of the ONS 15454 M2 Shelf, on page
Installing the ONS 15454 M2 Shelf
209.
Platforms.
218.