Dlp-G13 Remove The Lower Backplane Cover - Cisco ONS 15454 Hardware Installation Manual

DLP-G13 Remove the Lower Backplane Cover

Security Level
Procedure
Step 1 Complete the
Step 2
Complete the
Step 3 Continue with the
Stop. You have completed this procedure.
DLP-G13 Remove the Lower Backplane Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Unscrew the five retaining screws that hold the cover in place as shown in the following figure.
Figure 38: Lower Backplane Cover
Cisco ONS 15454 Hardware Installation Guide
64
None
DLP-G13 Remove the Lower Backplane Cover , on page
DLP-G14 Remove the Backplane Sheet Metal Cover , on page
NTP-G7 Install the Power and Ground , on page
This task removes the lower backplane cover of the ONS 15454 ANSI shelf.
#2 Phillips Dynamometric screwdriver
Medium slot-head screwdriver
Small slot-head screwdriver
None
Required
Onsite
None
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
64.
65.
68.