DLP-G12 Remove the FMEC Cover
Figure 36: Unscrewing the FMEC Cover
Step 2
Use the handles to pull the cover forward.
Step 3
Return to your originating procedure (NTP).
DLP-G12 Remove the FMEC Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Unscrew the nut holding the ground wire to the shelf. Remove the nut and washer.
Step 2
Remove the ground wire from the left side of the shelf.
Cisco ONS 15454 Hardware Installation Guide
62
This task removes the FMEC cover in order to install the MIC-A/P and the
MIC-C/T/P.
Medium slot-head screwdriver
DLP-G11 Open the FMEC Cover , on page 61
As needed
Onsite
None
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf