Cisco ONS 15454 Hardware Installation Manual page 423

Installing the ONS 15454 M6 Shelf
Figure 264: Removing the Fiber module
DLP-G654 Install the Cable Module
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Insert the air filter locking feature on the cable module. (See the following figure.)
Step 2 Attach the slot label identity on the cable module, with screws.
Step 3
Mount the cable module on the chassis, and tighten the screws to a torque value of 4 in-lb (0.45 N-m) to attach
the cable module to the ONS 15454 M6 shelf.
This procedure installs the cable module in the ONS 15454 M6 system.
Phillips cross-head PH screwdriver #1
DLP-G653 Remove the Fiber Module, on page 392
As needed
Onsite
None
Cisco ONS 15454 Hardware Installation Guide
DLP-G654 Install the Cable Module
393