Dlp-G293 Install Timing Wires In Ons 15454 M2 - Etsi - Cisco ONS 15454 Hardware Installation Manual

Installing the ONS 15454 M2 Shelf
Figure 169: AC-2 Power Module ANSI BITS Connectors
Step 2 Connect the wire wrap cable to the appropriate timing connector in the Power Module.
Step 3
Connect the other end of the cable to the external source of the timing.
Repeat step 3 for each cable that is needed.
Step 4 Return to your originating procedure (NTP).

DLP-G293 Install Timing Wires in ONS 15454 M2 - ETSI

Purpose This task installs the timing wires in the AC-2 or DC-2E Power Module of ONS
15454 M2 (ETSI).
Cisco ONS 15454 Hardware Installation Guide
DLP-G293 Install Timing Wires in ONS 15454 M2 - ETSI
257