Ntp-G331 Remove The Deep-Front Panel Of The Ons 15454 M2 Shelf - Cisco ONS 15454 Hardware Installation Manual

NTP-G331 Remove the Deep-Front Panel of the ONS 15454 M2 Shelf

Figure 149: Connecting the Ground Strap Cable
Stop. You have completed this procedure.
NTP-G331 Remove the Deep-Front Panel of the ONS 15454 M2 Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution
The deep-front panel does not have a hinge and cannot be rotated like a standard door. Rotating the deep front
panel can damage the deep-front panel, shelf hinges, other devices and cables placed below the ONS 15454
M2 shelf.
Cisco ONS 15454 Hardware Installation Guide
226
This procedure removes the deep-front panel of the ONS 15454 M2 system.
• #2 Phillips Dynamometric screwdriver
• Socket (6/32 standard) and socket wrench to tighten or loosen the ground
nut
• NTP-G266 Install the ONS 15454 M2 Shelf, on page 194
• NTP-G343 Install the Deep-Front Panel of the ONS 15454 M2 Shelf, on
page 222
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, see the
for Cisco CPT and Cisco ONS Platforms
Required
Onsite
None
Installing the ONS 15454 M2 Shelf
Electrostatic Discharge and Grounding Guide
.