Cisco ONS 15454 Hardware Installation Manual page 476

DLP-G261 Clean Multi Fiber-Optic Cable Connectors
Security Level
Warning
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Statement 1056
Procedure
Step 1 Using an inspection microscope, inspect each fiber connector for dirt, cracks, or scratches.
Step 2
Replace any damaged fiber connectors.
Note
Step 3 Complete the
Step 4
Complete the
Note
Stop. You have completed this procedure.
DLP-G261 Clean Multi Fiber-Optic Cable Connectors
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments. Statement 1051
Procedure
Step 1 Remove the protective cap on the optical fiber cable connector.
Cisco ONS 15454 Hardware Installation Guide
446
Maintaining the ONS 15454 M12 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
None
Replace all dust caps whenever the equipment is unused for 30 minutes or more.
DLP-G262 Clean Fiber Connectors with CLETOP, on page 447
DLP-G263 Clean the Fiber Adapters, on page 447
To clean multi-fiber optic connectors, complete the
Connectors, on page 446 as necessary.
This task cleans the multi fiber optic connectors
Cleaning Cartridge for multi fiber optic connectors
None
Required
Onsite
None
as necessary.
as necessary.
DLP-G261 Clean Multi Fiber-Optic Cable