Cisco ONS 15454 Hardware Installation Manual page 41

Preparing to Install the ONS 15454 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
Cisco Supplied ONS 15454
Material
Power Lug —
Screws ANSI
• #12-24 x 3/4 pan-head Phillips
mounting screws (48-1004-XX,
48-1007-XX) (8)
• #12 -24 x 3/4 socket set screws
(48-1003-XX) (2)
ETSI
• M4 x 8 mm pan-head Phillips screws
(2)
• M6 x 20 mm pan-head Phillips
screws (8)
Spacers ANSI
Spacers (50-1193-XX)(4)
Standoff Kit ANSI
Standoff kit (53-0795-XX):
Plastic fiber management guides (2)Fan
filter bracket screws (53-48-0003) (6)
Tie Wraps
ANSI
Tie Wraps (10)
ETSI
Tie wraps 0.125-inch (3.2 mm) W x
6.0-inch (152 mm) L (24)
Caution Only use the power cables that are designed to be used with the ONS 15454 (ANSI or ETSI), the ONS 15454
M2 or ONS 15454 M6. These are sold separately.
User Supplied Materials
The following materials, tools, and equipment are required but are not supplied with the ONS 15454 (ANSI
and ETSI), ONS 15454 M2 and ONS 15454 M6.
ONS 15454 M2
ANSI
Double-hole power lug for DC
power connection with a wire
receptacle to accommodate the
recommended 8.4 mm² (#8 AWG)
multistrand copper wire (1)
ANSI
#12-24 x 0.50 pan-head Phillips
screws (8)
ETSI
M6.0 x 20 pan-head Phillips screws
(8)
—
—
Tie wraps (10)
Cisco ONS 15454 Hardware Installation Guide
User Supplied Materials
ONS 15454 M6
—
ANSI
#12-24 x 0.50 pan-head Phillips
screws (8)
ETSI
M6.0 x 20 pan-head Phillips
screws (8)
—
—
Tie wraps (10)
11