Cisco ONS 15454 Hardware Installation Manual page 475

Maintaining the ONS 15454 M12 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
Figure 295: Replacing the Air Filter—AC Power Module
Step 4
Replace the air filter with a new one if the air filter is dirty or clogged with dust.
Step 5 Close the front door. If you removed the door, complete the
15454 M6 Shelf , on page 323
Stop. You have completed this procedure.
NTP-G115 Clean Fiber Connectors
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
This procedure cleans the fiber connectors.
Inspection microscope
Type A Fiber Optic Connector Cleaner (CLETOP reel)
Optical swab
Optical receiver cleaning stick
None
Required
Onsite
Cisco ONS 15454 Hardware Installation Guide
NTP-G115 Clean Fiber Connectors
NTP-G258 Install the Standard Door of the ONS
445