Cisco ONS 15454 Hardware Installation Manual page 335

Installing the ONS 15454 M6 Shelf
Caution
Use only the fastening hardware provided with the ONS 15454 M6 to prevent loosening, deterioration, and
electromechanical corrosion of the hardware and joined material.
Caution
When mounting the ONS 15454 M6 in a frame with a nonconductive coating (such as paint, lacquer, or
enamel) either use the thread-forming screws provided with the ONS 15454 M6 ship kit, or remove the coating
from the threads to ensure electrical continuity.
Procedure
Step 1 Place the mounting bracket flush against the shelf as shown in the following figure.
Step 2
Align the mounting bracket screw holes against the shelf screw holes.
Step 3 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 4
Repeat steps 1 through 3 for the mounting bracket on the opposite side.
Figure 205: Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack Configuration
Step 5
Return to your originating procedure (NTP).
DLP-G562 Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack Configuration
Cisco ONS 15454 Hardware Installation Guide
305