Cisco ONS 15454 Hardware Installation Manual page 233

Installing the ONS 15454 M2 Shelf
Figure 125: Mounting the Brackets on the ONS 15454 M2 Shelf for ETSI Rack Configuration
Step 5 Return to your originating procedure (NTP).
DLP-G586 Mounting the Air Deflectors (Front-to-Front) on the ONS 15454 M2 Shelf for ETSI Rack
Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution Use only the fastening hardware provided with the ONS 15454 M2 to prevent loosening, deterioration, and
electromechanical corrosion of the hardware and joined material.
Note The air deflectors can be installed only in the front position of the chassis.
DLP-G586 Mounting the Air Deflectors (Front-to-Front) on the ONS 15454 M2 Shelf for ETSI Rack Configuration
This task mounts the air deflectors (front-to-front) on the ONS 15454 M2 shelf
for ETSI rack configuration.
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2, and ONS 15454
M6 Shelves, on page 20
As needed
Onsite
None
Cisco ONS 15454 Hardware Installation Guide
203