Cisco ONS 15454 Hardware Installation Manual page 45

Preparing to Install the ONS 15454 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
User
Supplied
Material
Wire
Wrapper
Note Ring runs are not provided by Cisco and can hinder side-by-side shelf installation where space is limited.
Ordering Solutions for ONS 15454 M2 and ONS 15454 M6
Two ordering solutions for the ONS 15454 M2 shelf are offered. Select one of the solution:
• Shelf that is preinstalled with all the ancillary units such as fan tray assembly and power module.
• Shelf that is not preinstalled with the ancillary units but can be ordered separately.
Note In both the ordering solutions, the front door is preinstalled with the ONS 15454 M2 shelf.
Two ordering solutions for the Cisco ONS 15454 M6 shelf are offered. Select one of these solutions:
• Shelf assembly that is preinstalled with all the ancillary units such as fan tray assembly, LCD unit, power
• Shelf assembly that is not preinstalled with the ancillary units but can be ordered separately.
Card Slot Requirements
The cards have electrical plugs at the back that plug into electrical connectors on the shelf backplane. When
the ejectors are fully closed, the card plugs into the assembly backplane.
ONS 15454
The following figure shows card installation for an ONS 15454 ANSI shelf.
ONS 15454
Wire wrapper
module and ECU or ECU2.
Ordering Solutions for ONS 15454 M2 and ONS 15454 M6
ONS 15454 M2
Wire wrapper
Cisco ONS 15454 Hardware Installation Guide
ONS 15454 M6
Wire wrapper
15