Cisco ONS 15454 Hardware Installation Manual page 455

Installing the ONS 15454 M6 Shelf
Figure 281: Upgrading the ONS 15454 Multishelf Configuration Using the MS-ISC Card
Step 6
To configure the Catalyst 3560 (extended) using IOS commands, complete the
Catalyst 2950 or Catalyst 3560 (Active and Standby) for a ONS 15454 Multishelf Node, on page
Step 7 Return to your originating procedure (NTP).
NTP-G264 Perform the ONS 15454 M6 Shelf Installation
Acceptance Test
Purpose
NTP-G264 Perform the ONS 15454 M6 Shelf Installation Acceptance Test
Use this procedure to perform a shelf installation acceptance test for the ONS
15454 M6.
Cisco ONS 15454 Hardware Installation Guide
NTP-G298 Configure a Cisco
152.
425