Maintaining the ONS 15454 M12 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
NTP-G795 Change System Mode Using LCD
Figure 306: Attaching Plastic Lower Backplane Cover
Step 5
Tighten the five retaining screws that hold the plastic cover in place.
Stop. You have completed this procedure.
NTP-G795 Change System Mode Using LCD
For ONS 15454 M2 and 15454 M6, the system mode can be changed from ANSI (SONET) to ETSI (SDH)
or vice-versa. Changing the system mode removes the provisioned data and the system reverts to the default
configuration.
Cisco ONS 15454 Hardware Installation Guide
464