Cisco ONS 15454 Hardware Installation Manual page 403

Installing the ONS 15454 M6 Shelf
Step 3
Connect the office ground to the ONS 15454 M6 shelf. For detailed instructions on grounding, see the
Electrostatic Discharge and Grounding Guide for Cisco CPT and Cisco ONS
Step 4 Complete the
Step 5
Continue with the
Stop. You have completed this procedure.
DLP-G571 Connect Office Power (AC) to the ONS 15454 M6 Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note
This product is intended for use on the TN and TT power systems.
Warning
When installing or replacing the unit, the ground connection must always be made first and disconnected
last. Statement 1046
DLP-G575 Turn On and Verify DC Office Power on the ONS 15454 M6 Shelf, on page 386
NTP-G257 Install the Fan-Tray Assembly in the ONS 15454 M6 Shelf, on page
This task connects AC power to the ONS 15454 M6 shelf.
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
• Wire wrapper
• Wire cutters
• Wire strippers
• Crimp tool
• Fuse panel
• Ground cable 13.3-mm² (#6 AWG) stranded. The PIDs of the power cables
are listed in
• NTP-G252 Install the ONS 15454 M6 Shelf , on page
• NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6
Shelf , on page
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, see the
for Cisco CPT and Cisco ONS
• NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf , on page
355.
Required
Onsite
None
DLP-G571 Connect Office Power (AC) to the ONS 15454 M6 Shelf
Table 33: PIDs for AC Power Cables, on page
327.
Electrostatic Discharge and Grounding Guide
Platforms.
Cisco ONS 15454 Hardware Installation Guide
Platforms.
388.
376.
294.
373