FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 6-17 Removing the front cover from a camera
Step 2 Remove the screws from the camera.
Figure 6-18 Removing a camera
Step 3 Remove the monitoring network cable from the camera and remove the camera.
Step 4 Install the new camera. Then, set parameters and commission the camera according to the
commissioning guide.
Step 5 Verify that the camera is normal.
----End
6.4.3 Parts Replacement for the Access System
6.4.3.1 Replacing an Access Actuator
Impact on the System
The aisle access control system cannot be used.
Issue 05 (2020-03-25)
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
69