Commissioning Core Components; Commissioning Power Distribution Components; Commissioning The Power Distribution Cabinet - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
9

9.1 Commissioning Power Distribution Components

9.1.1 Commissioning the Power Distribution Cabinet

Prerequisites
●
●
Preparations
Tool: multimeter
Documents: power supply and distribution system diagram, power supply and
distribution device layout diagram
Skill requirement: power distribution engineer
Procedure
Step 1 Switch on the input power circuit breaker to power on the PDF.
1.
2.
Issue 03 (2022-12-15)

Commissioning Core Components

You have verified all the specifications for the power-on.
You have put on protective articles.
NO TE
For the diagrams, see the initial configuration parameter manual for the solution in use.
NO TE
● The input power circuit breaker refers to the output circuit breaker that controls power
supply from the upstream power distribution equipment to the PDF.
● If the power indicators (if configured) on the PDF have turned on, the PDF has been
powered on.
● The general PDF circuit breaker can be an ATS, MCCB, or MCB.
(Optional) If an ATS is configured, go to
(Optional) If an MCCB or MCB is configured, go to
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
Step 2.
Step 3.
56