Principle Of Qos Data Plan - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

14.2.3 Principle of QoS Data Plan

QoS planning for the base station access service is end-to-end. QoS policies include traffic
classification, marking and scheduling, traffic monitoring, and DBA policies. QoS policies for
different scenarios are different. This topic provides QoS policies in the following scenarios.
E1 Base Station Access Service (in Native TDM Mode)
In this scenario, ONUs access services through E1 lines. Therefore, the QoS policies are mainly
planned for traffic on PON lines.
Parameter
T-CONT
DBA type
DBA bandwidth
E1/T1 Base Station Access Service (in GPON SAToP Mode)
In this scenario, ONUs access services through E1/T1 lines. Therefore, the QoS policies are
mainly planned for traffic on PON lines.
Parameter
T-CONT
DBA type
Issue 01 (2014-04-30)
Value
It is recommended that the number
of T-CONTs do not exceed 3. The
T-CONT ID ranges from 1 to 3.
Fixed bandwidth and minimum
delay
Nx7232 kbit/s is recommended. (N
is the number of E1 lines.)
Value
It is recommended that the number
of T-CONTs do not exceed 3. The
T-CONT ID ranges from 1 to 3.
Fixed bandwidth and minimum
delay
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
Remarks
It is recommended that all E1 lines
of the same ONU use the same T-
CONT.
The DBA must be configured
properly to achieve low delay, low
jitter, and zero packet loss so that
the quality of the E1 base station
access service can be ensured.
It is recommended that the T-
CONT ID be 1, 2, or 3 and all E1
lines of the same ONU use the
same T-CONT. This setting can
leverage bandwidth resources.
Each E1 line requires only 5440
kbit/s.
Remarks
It is recommended that all E1 lines
of the same ONU use the same T-
CONT.
The DBA must be configured
properly to achieve low delay, low
jitter, and zero packet loss so that
the quality of the T1 base station
access service can be ensured.
1369

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents