Siemens SINUMERIK 840D sl Series Diagnostics Manual page 526

Overview of Alarms
70012
Channel %1 unreachable point
Parameters: %1 = Channel number
Definitions: Failure in the cyclic backward transformation in the interpolator or in the forward transfor-
mation, e.g. after RESET.
Extreme distortions of the mechanical system in the current point may be the reason.
Reactions: - NC Start disable in this channel.
- Alarm display.
- NC Stop on alarm.
Remedy: Deselect transformation and relieve mechanism
Program Con- Clear alarm with the RESET key. Restart part program
tinuation:
70013
Channel %1 block %2 axis %3 reaches angle %4 on platform
Parameters: %1 = Channel number
%2 = Block number
%3 = Channel axis
%4 = Limit angle "+" or "-"
Definitions: The indicated block includes a position on which the limit angles on the platform are
exceeded, see MD 62126 und 62127.
Reactions: - Local alarm reaction.
- Interface signals are set.
- Alarm display.
Remedy: Modify parts program block
Program Con- Clear alarm with the RESET key. Restart part program
tinuation:
70014
Channel %1 block %2 axis %3 reaches angle %4 on the drive
Parameters: %1 = Channel number
%2 = Block number
%3 = Channel axis
%4 = Limit angle "+" or "-"
Definitions: The indicated block includes a position on which the limit angles on the linear guides are
exceeded, see MD 62128 and 62129.
Reactions: - Local alarm reaction.
- Interface signals are set.
- Alarm display.
Remedy: Modify parts program block
Program Con- Clear alarm with the RESET key. Restart part program
tinuation:
70015
Channel %1 axis %2 reaches angle %3 on platform
Parameters: %1 = Channel number
%2 = Channel axis
%3 = Limit angle "+" or "-"
Definitions: Cyclic monitoring of the cardanic angle on the platform detects a violation. The machine
axes are decelerated after having reached their max. acceleration. The specified contour
is left. %3 indicates the affected limit value.
• : MD 62126 was not reached
+ : MD 62127 was exceeded
Reactions: - NC Start disable in this channel.
- Alarm display.
2-526
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005