Siemens SINUMERIK 840D sl Series Diagnostics Manual page 565

08/2005
104024
Error in Tool Unload
Definitions: An error occurred while a tool was being unloaded; the procedure has been aborted.
Remedy: Check unloader.
104025
No magazine configured
Definitions: No magazine was configured.
Remedy: Configure a magazine via the machine data.
104026
Caution: Tool Load running !
Definitions: Note regarding loading process.
Remedy: Wait until the loading procedure is terminated.
104027
Caution: Tool Unload running !
Definitions: Note regarding unloading process.
Remedy: Wait until the unloading procedure is terminated.
104028
Error on accessing general tool data
Definitions: --
Remedy: --
104029
You cannot load into this location
Definitions: The location may already be occupied.
Remedy: Select another loading location.
104030
No more data found
Definitions: All existing data was already displayed.
Remedy: --
104031
There is no preselected tool
Definitions: --
Remedy: --
104032
There is no preselected cutting edge
Definitions: --
Remedy: --
104033
Error on Delete cutting edge
Definitions: --
Remedy: --
104034
No work offset selected
Definitions: --
Remedy: --
104035
Position minus coarse offset was transferred
Definitions: --
Remedy: --
104100
PA: Error on opening the menu
Definitions: --
Remedy: --
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-565