Siemens SINUMERIK 840D sl Series Diagnostics Manual page 560

Overview of Alarms
102007
Error on deleting %1
Parameters: %1 = --
Definitions: --
Remedy: --
102008
Invalid file name
Definitions: --
Remedy: --
102009
RS232 stop accepted - please wait !
Definitions: --
Remedy: --
102010
RS232C transmission error has occurred -> error log
Definitions: --
Remedy: --
102011
You cannot copy and paste the file in this path
Definitions: --
Remedy: --
102012
RS232C transmission stopped
Definitions: --
Remedy: --
102013
Error: RS232C running
Definitions: --
Remedy: --
102014
V24.DLL cannot be loaded
Definitions: --
Remedy: --
102015
RS232C ready %1 %2
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --
102016
Operating area change disabled
Definitions: --
Remedy: --
102017
Please select drive/path for archive
Definitions: --
Remedy: --
103000
No correction block in the NCK
Definitions: The following is valid up to SW 3.x:
The correction block window cannot be opened. No program correction is possible in the
operating mode "Machine".
2-560
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005