Siemens SINUMERIK 840D sl Series Diagnostics Manual page 970

List of Action Numbers
No. 105
Explanation Continuation of a single-axis movement (VDI signal).
Not allowed if The axis has not been stopped previously. Not for all axis types at present.
Remedy -
No. 106
Explanation Interruption of a single-axis movement (VDI signal).
Not allowed if the axis is not controlled by the PLC. Not for all axis types at present.
Remedy -
No. 107
Explanation Deletion of distance-to-go of a single-axis movement (VDI signal).
Not allowed if the axis is not controlled by the PLC. Not for all axis types at present.
Remedy -
No. 108
Explanation Activation: Axis is now controlled by the PLC (VDI signal).
Not allowed if the axis is not controlled by the PLC. Not for all axis types at present.
Remedy -
No. 109
Explanation Deactivate: Axis is now controlled by the PLC (VDI signal).
Not allowed if the axis is not controlled by the PLC. Not for all axis types at present.
Remedy -
No. 115
Explanation The event is triggered by the positive PLC edge of the "Repos-Mode-Edge" signal.
Not allowed if The channel is active (program running, block search, loading machine data).
Remedy Abort the program with the Reset key or stop the program (not with block search, loading
machine data).
3-970
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005