Siemens SINUMERIK 840D sl Series Diagnostics Manual page 597

08/2005
Program Con- Internal
tinuation:
112301
Tool management concept 2 not possible%nMagazine not sorted like tool list.
Definitions: The magizine list sorting does not correspond to that of the tool list.
In the magazine of tool management type 2, the sequence of the tools has to be defined
according to their T numbers.
Reactions: - Alarm display.
Remedy: Installation and start-up: Assign the tools according to their T numbers to the magazine
locations.
Program Con- Internal
tinuation:
112320
Replace manual tool:%n%1.
Definitions: The operator is prompted to replace the indicated manual tool.
Reactions: - Alarm display.
Remedy: Replace the manual tool.
Program Con- Internal
tinuation:
112321
Load manual tool:%n%1.
Definitions: The operator is prompted to load the specified manual tool.
Reactions: - Alarm display.
Remedy: Load the manual tool.
Program Con- Internal
tinuation:
112322
Exchange manual tool:%n%1 -> %2.
Definitions: The operator is prompted to replace the specified manual tool by the new manual tool.
Reactions: - Alarm display.
Remedy: Replace the manual tool.
Program Con- Internal
tinuation:
112323
Replace inclinable head:%n%1
Definitions: The operator is prompted to remove the specified swivel head from the spindle.
Reactions: - Alarm display.
Remedy: Replace swivel head.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112324
Load inclinable head:%n%1
Definitions: The operator is prompted to load the specified swivel head into the spindle.
Reactions: - Alarm display.
Remedy: Load swivel head.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112325
Exchange inclinable head:%n%1 -> %2
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-597