Siemens SINUMERIK 840D sl Series Diagnostics Manual page 499

08/2005
Remedy: --
61739
Channel %1 block %2: Wrong insert position of tool for this machining operation
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61740
Channel %1 block %2: Blank must be closed contour
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: Check whether blank contour is closed, i.e. starting point = end point.
61741
Channel %1 block %2: Abort due to insufficient memory space
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61742
Channel %1 block %2: Approach collision, correction not possible
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61766
Channel %1 block %2: Error in blank program
Parameters: %1 = Channel number
%2 = Block number, label
Definitions:
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy: --
Program Con- Internal
tinuation:
61798
Channel %1 block %2: Acknowledgment error ACTIVATE
Parameters: %1 = Channel number
%2 = Block number, label
Definitions:
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-499