Siemens SINUMERIK 840D sl Series Diagnostics Manual page 500

Overview of Alarms
Remedy: --
Program Con- Internal
tinuation:
61799
Channel %1 block %2: Acknowledgment error READYPROG
Parameters: %1 = Channel number
%2 = Block number, label
Definitions:
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy: --
Program Con- Internal
tinuation:
61800
Channel %1 block %2: Ext. CNC system missing
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Machine data for external language MD18800: $MN_MM_EXTERN_LANGUAGE or
option bit 19800 $ON_EXTERN_LANGUAGE is not set.
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy: --
Program Con- Internal
tinuation:
61801
Channel %1 block %2: Wrong G code selected
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: In the program call CYCLE300<value> an impermissible numerical value was pro-
grammed for the entered CNC_System, or in the Cycles_Setting_Datum an incorrect
value for the G_Code_System was set.
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy: --
Program Con- Internal
tinuation:
61802
Channel %1 block %2: Wrong axis type
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: The programmed axis is assigned to a spindle
Reactions: - Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
2-500
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005