Siemens SINUMERIK 840D sl Series Diagnostics Manual page 558

Overview of Alarms
Parameters: %1 = --
Definitions: In the start-up area the function "Confirm Safety Integrated Data" has been started.
The message was output during this function in order to provied the user with an acknowl-
edgement regarding the operation of the function.
Remedy: --
101210
Machine data being prepared for display
Definitions: A list image in the machine data was selected for which display options are active.
This image's machine data is individually checked to see whether it is permitted to be dis-
played.
Remedy: --
101211
Address of NCK not changed!
Definitions: An attempt was made to change the bus address of the NCK in the start-up area.
The change was rejected by the NCK; the reason is unknown.
Remedy: --
101212
Address of NCK changed
Definitions: The NCK's bus address was set to the specified value.
Remedy: --
101213
Invalid NCK address!
Definitions: The value specified for the new NCK bus address is too large.
Remedy: --
101214
Initialization of this window unsuccessful!
Definitions: An attempt was made to select the image of the NCK address in the start-up area.
An error occured while determining the nodes on the bus.
Due to inconsistent data, this image cannot be displayed.
Remedy: --
101300
Please wait - Language being changed
Definitions: In the start-up area the softkey "Change language" was pressed.
The screen content is being restructured.
Remedy: --
101301
Versions saved -> output via %1
Parameters: %1 = --
Definitions: --
Remedy: --
101310
Error in %1: line %2: %3: error in XML structure.
Definitions: --
Remedy: Correct the error in the indicated line.
101311
Error in %1: line %2: %3: path not found.
Definitions: --
Remedy: Correct the indicated line of the path.
101400
License key set.
2-558
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005