Siemens SINUMERIK 840D sl Series Diagnostics Manual page 602

Overview of Alarms
Program Con- Internal
tinuation:
112543
Prog. was created with higher software version
Definitions: The part program has been created with a software version higher than the existing one.
Reactions: - Alarm display.
Remedy: Delete the machining step and reprogram machining if required.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
112544
Program cannot be opened.%nIt is already being edited.
Definitions: Program is already open in HMI Advanced (Program or Services operating area).
Reactions: - Alarm display.
Remedy: Close program in HMI Advanced (Program or Services operating area).
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
112546
Program cannot be opened.%nNo read access to the file.
Definitions: The file has no write access for the current access level.
Reactions: - Alarm display.
Remedy: Set read access with keyswitch or via password.
Program Con- Internal
tinuation:
112550
Sequencer programming is not opened.
Definitions: Option 'Sequencer programming' has not been set.
Reactions: - Alarm display.
Remedy: The program is opened as G code.
Program Con- Internal
tinuation:
112600
Spindle not synchronized.
Definitions:
Reactions: - Alarm display.
Remedy: Synchronize the spindle.
Program Con- Internal
tinuation:
112601
ShopTurn: %1
Definitions: A system error has occurred.
Reactions: - Alarm display.
Remedy: Please contact the hotline of Siemens AG, A&D MC and provide with the error message.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
112604
Connection to PLC aborted
Definitions: Acknowledgement to the PLC user program, that the connection with the PCU has been
broken off.
ShopMill PLC is terminated.
Reactions: - Alarm display.
Remedy: Check the PLC user program.
2-602
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005