Siemens SINUMERIK 840D sl Series Diagnostics Manual page 956

List of Action Numbers
No. 31
Explanation Stop the JOG motion (VDI signal: NC Stop)
Not allowed if -
Remedy -
No. 32
Explanation Stop digitizing processing (VDI signal: NC Stop).
Not allowed if -
Remedy -
No. 33
Explanation Start selected processing (VDI signal: NC Start).
Not allowed if Process change active (operating mode change, activate/deactivate digitizing/overstore)
An alarm reaction is pending which prevents a start or forces braking.
A process is running (NC program, block search, loading machine data)
Remedy Execute condition for clearing alarm
No. 34
Explanation Stop the active processing (VDI signal: NC Stop).
Not allowed if -
Remedy -
No. 35
Explanation Start machine data processing (INI file is already in the NCK)
(PI command).
Not allowed if -
Remedy -
3-956
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005