Appendix 2.15.2 Operator Messages - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
Appendix 2 Explanation of Alarms

Appendix 2.15.2 Operator Messages

The following messages indicate the status of the setting and display functions‚ and are not operation errors. They are
mainly used to show that operation is normal‚ and serve as guides for the following operations. There is no classification
by numbers.
(1) Search and operation related
SEARCH EXECUTION
SEARCH COMPLETE
(2) MDI/editing related
Message
MDI NO SETTING
MDI SETTING COMPLET
MDI ENTRY COMPLETE
MDI RUNNING
PUSH KEY SEARCH/PROG
EDITING
EDIT (REP.)
EDIT (INS.)
EDIT (CAN'T INSERT)
EDIT (CAN'T REPLACE)
IGNORE CHANGE (Y/N)
PROGRAM RUNNING
DELETE?
BACK GROUND EDITING
EDIT POSSIBLE
EDIT IMPOSSIBLE
WORD SEARCH FIN
548
Message
- Search is being executed normally.
- Search was completed normally.
- Only display of MDI data (no execution)
- The MDI data setting has been completed (execution is now possible).
- The MDI data was saved in the memory with the specified program No.
- The NC is operating with an MDI program‚ and the MDI data cannot be corrected.
- Status in which no programs to be edited have been called on the editing screen.
To edit‚ press the SEARCH or PROGRAM edit key.
- The details of a program are being edited on the screen. Press INPUT to write the
data in the memory.
- The program can be edited on the screen in the replace mode.
- The program can be edited on the screen in the insert mode.
- The data can be inserted no more because of the shortage of space area while
editing the program on the screen with insert mode. Cancel the insertion-impossible
state by moving a cursor and release some data area.
- The data can be replaced no more since the cursor reached the end of editing area
while editing the program on the screen with replace mode. Cancel the replace-
impossible state by cursor, DEL key, or C•B/CANCEL.
- The keys to change the display such as NEXT/BACK page keys, menu change key,
screen change key, or scroll keys, were pressed while editing a program on the
screen.
To cancel the changed contents, select "Y".
To leave the changes as they are, select "N".
- A machining program to be edited is currently being run with memory operation‚ and
cannot be edited.
- Waiting for a key entry (whether to delete the program) in word edit status (when
the background search menu is selected)
- Background edit mode
- Editing can be performed in foreground edit mode.
- Editing cannot be performed in foreground edit mode.
- This state also occurs during feed hold or fixed cycle mode (single-block stop).
- The word matching the search data was searched on word editing.
Message details
Message details