Mitsubishi Electric C70 Setup Manual page 2

This manual is the setup manual required to use the C70.
This manual is prepared on the assumption that your machine is provided with all of the C70 functions.
Confirm the functions available for your NC before proceeding to operation by referring to the specification issued
by the machine tool builder.
Notes on Reading This Manual
(1) This manual explains general parameters as viewed from the NC.
For information about each machine tool, refer to manuals issued from the machine tool builder.
If the descriptions relating to "restrictions" and "allowable conditions" conflict between this manual and the
machine tool builder's instruction manual, the later has priority over the former.
(2) This manual is intended to contain as much descriptions as possible even about special operations.
The operations to which no reference is made in this manual should be considered impossible.
CAUTION
If the descriptions relating to the "restrictions" and "allowable conditions" conflict between this manual
and the machine tool builder's instruction manual, the latter has priority over the former.
The operations to which no reference is made in this manual should be considered "impossible".
This manual is complied on the assumption that your machine is provided with all optional
functions. Confirm the functions available for your machine before proceeding to operation by referring to
the specification issued by the machine tool builder.
In some NC system versions‚ there may be cases that different pictures appear on the screen‚ the machine
operates in a different way or some function is not activated.
Introduction