Mitsubishi Electric C70 Setup Manual page 60

(2) Select the following items from among the pull-down menu, and click "OK".
GOT type: Select the model name of the GOT to use ("GT15**-..."/"GT16**-...")
Controller type: MELSEC-QnU, Q17nD/M/NC/DR, CRnD-700
A dialog box appears to confirm the communication setting. Click "Yes".
(3) The "System Environment" dialog box now displays "Communication Settings". Confirm "Use Communication
Settings" is checked, and select the following items of the extended I/F setting from among the pull-down menu.
Extend I/F-1 1st
CH No.: 「1」
Driver: "Bus Q"
Then click "Detail Setting...".
(Note) Select "Extend I/F-2(1st)" when the bus communication unit is mounted on the GOT rear slot IF-2.
C70 Setup Manual
2.2 GT Designer2
43