Mitsubishi Electric C70 Setup Manual page 52

<Setting in GT Designer2's "New Project Wizard">
In this method, the communication settings are saved in a newly created project by the GT Designer2 project wizard.
(Note) Depending on your GT Designer2's setting, "New Project Wizard" may not appear. For how to display
"New Project Wizard", refer to "GT Designer2 Version2 Basic Operation/Data Transfer Manual (SH(NA)-
080529)".
(1) Start GT Designer2, and click "New" in the "Select Project" dialog box to display "New Project Wizard". Click "Next
>".
(2) Select the following item from among the pull-down menu.
GOT type: Select the model name of the GOT to use ("GT15**-...")
Color Settings: Select the number of colors
Check the setting. If correct, click "Next >".
(3) Check the settings. If correct, click "Next >".
C70 Setup Manual
2.2 GT Designer2
35