Mitsubishi Electric C70 Setup Manual page 186

Setup Parameters
Pressing the menu [SET UP] displays the OPEN SETUP PARAM screen.
The system's basic parameters are normally hidden as setup parameters to prevent mistaken operations and to simplify
the display.
The setup parameters can be displayed and set by making a declaration to open the setup parameters on this screen.
(1) Select the setup parameter.
Key-in "Y" in # ( ), and then press [INPUT].
Pressing the MENU key displays the normally hidden setup parameter menu.
The required menu can be selected to display and set the setup parameters.
(2) Cancel the setup parameter selection.
Key-in "N" in # ( ), and then press [INPUT].
The setup parameter menu will disappear.
(Note) The setup parameters are not displayed when the power is turned on.
Refer to "Base Specifications Parameters" and following for details on the setup parameters.
Always turn the power OFF after selecting the setup parameters.
C70 Setup Manual
Appendix 1.1 Parameter Screens
169