Got Communication Setting - Mitsubishi Electric C70 Setup Manual

C70 Setup Manual

5.1 GOT Communication Setting

5.1 GOT Communication Setting
When connecting with Ethernet, add the row as many as the number of CNC CPUs on GT Designer3 / GT Designer2,
and set the values. Set the different PLC No. and IP address from those for the 1st CNC CPU.
Other settings are the same as when setting one CNC CPU.
For GT Designer3: "Controller Setting"-"Network/Duplex Setting"-"Ethernet"
For GT Designer2: "Project"-"Common Settings"-"Ethernet"
Bus connection settings are the same as when setting one CNC CPU.
91