Appendix 1.1 Parameter Screens; Appendix 1.1.1 User Parameters; Appendix 1.1.2 Setup Parameters - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
Appendix 1 Explanation of Parameters

Appendix 1.1 Parameter Screens

The parameter input setting units are as follows.
Input unit
"#1003 iunit"
B
C

Appendix 1.1.1 User Parameters

The following menus can be selected when the key [TOOL PARAM] is pressed.
Menu
PROCESS
SETUP

Appendix 1.1.2 Setup Parameters

The following menus can be selected when SETUP is selected.
Menu
BASE
AXIS SPEC
SERVO
SPINDLE
Multi-CPU
NET Parameters
MC-ERR
PLC
MACRO
PSW
168
Linear axis "#1017 rot" = 0
Machine constant: mm
"#1040 M_inch" = 0
0.001 mm
0.0001 mm
Details
The PROCESS PARAM screen will open.
The screen to set the setup parameters will open.
Details
The BASE SPEC. PARAM screen will open.
The AXIS SPEC PARAM screen will open.
The SERVO PARAM screen will open.
The SPINDLE BASE SPEC. PARAM screen will open. Spindle Parameters
The MULTI-CPU PARAM screen will open.
The FL-NET PARAM and DEVICE NET PARAM
screen will open.
The MC-ERR. CMP. screen will open.
The PLC DATA screen will open.
The MACRO FILE screen will open.
The POSITION SWITCH screen will open.
Machine constant: inch
"#1040 M_inch" = 1
0.0001 inch
0.00001 inch
Reference Section
Process Parameters
Setup Parameters
Reference Section
Base Specifications Parameters
Axis Specifications Parameters
Servo Parameters
Multi-CPU Parameter
FL-net parameters
Device Net parameters
Machine Error Compensation
PLC Parameters
Macro List
Position Switch
Rotary axis
"#1017 rot" = 1
0.001°
0.0001°