Data Restoration - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
10 Data Backup and Restoration

10.2.2 Data Restoration

Backup / Restoration function is installed on GOT1000 series.
The backup data can be restored to each CPU module one by one in easy operation.
USB memory can be used on GOT1000 series GT16.
To exchange the CNC CPU unit, initialize the internal data. Refer to "4.2 Initializing CNC CPU Internal Data (Clearing
SRAM Data)" for how to initialize.
(Note) The zero point of rotary axis will disappear after replacing the CNC CPU unit. Repeat the zero point
initialization.
162
CF card
USB memory
( )
CNC CPU Q173NCCPU
QnUD(E)CPU
PLC CPU
QnUD(E)HCPU
M E L S E C M E L S E C
MITSUBISHI MITSUBISHI
GOT1000 Series
(SVGA / XGA)
POWER POWER