Setting The Ip Address - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
5 Connecting and Setting up Multiple CNC CPU Modules

5.2 Setting the IP Address

When connecting with Ethernet, the IP address of the 2nd CNC CPU needs to be changed.
To change the IP address for the 2nd CNC CPU, connect GOT and the 2nd CNC CPU one-on-one, and then set
"192.168.1.3" to "#1926 IP address" from the CNC monitor screen.
[Connection diagram]
GOT
M EL S E C M EL S E C M EL S E C M EL S E C
POWER POWER POWER POWER
MITSUBISHI MITSUBISHI MITSUBISHI MITSUBISHI
92
HUB
NC1 NC2
[CNC monitor screen]