Mitsubishi Electric C70 Setup Manual page 365

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#29017(PR)】 Status Data:Word Area Other Node Inform.
Status data: Word area other node information area
Set a device to store the following data:
<1st to 16th word: Other node information area>
Participation node list:
Indicates the token participation status at the other node in bits.
0: Participation / 1: Release
1st word
2nd word
<17th to 32nd word: Other node information area>
Other node network parameter setting status:
Indicates the parameter setting status at the other node in bits.
0: Setting / 1: No setting
<33rd to 48th word: Other node information area>
Other node CPU operation status:
Indicates the execution status of Qn(H)CPU, etc., at the other node.
0: RUN status (RUN, STEP_RUN) / 1: STOP status (STOP, PAUSE)
<49th to 64th word: Other node information area>
Other node CPU operation status (Low level error):
Indicates the results of self-diagnosis of Qn(H)CPU, etc., at the other node.
0: Normal / 1: Warning
<65th to 80th word: Other node information area>
Other node CPU operation status (Medium, high level errors):
Indicates the results of self-diagnosis of Qn(H)CPU, etc., at the other node.
0: Normal/ 1: Alarm
---Setting range---
Within the number of device points set in the PC parameter's device setting.
348
bit15 bit0
Node 15 Node 1
Node 16
Node 31