Mitsubishi Electric C70 Setup Manual page 30

(3) The "Controller Setting" dialog is displayed. Select the following items among the pull-down menu.
Controller Type: MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700
I/F: Extend I/F-1 1st
Driver: Ethernet(MELSEC), Q17nNC, CRnD-700
(Note) Select "Extend I/F-2(1st)" when the Ethernet communication unit is mounted on the GOT rear slot IF-2.
(4) Set the following values in "Detail Setting".
GOT NET No.: 1
GOT PC No.: 1
GOT IP Address: GOT's own IP address (Example: 192.168.1.1)
After setting, click "Apply" to confirm the setting values.
C70 Setup Manual
2.1 GT Designer3
13