Setting The Saving Destination Drive For Backup Data - Mitsubishi Electric C70 Setup Manual

2.2.3 Setting the Saving Destination Drive for Backup Data

A saving destination drive for backup data (Refer to"Data Backup and Restoration") needs to be set on the GT
Designer2 project.
"A: Standard CF Card" or "E: USB Drive" (GT16 only) can be chosen.
(1) Open the GT Designer2 project with a personal computer, and then double click the "GOT Setup" from "System
Environment".
(2) Check the "Use GOT Setup" check box, then grey out items are available to set.
(3) Scroll the screen to select "Destination Drive for Backup Setting" and "Destination Drive for Backup Data" in the
"Backup/Restore Setting".
C70 Setup Manual
2.2 GT Designer2
45