Mitsubishi Electric C70 Setup Manual page 383

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#29085(PR)】 Slave Func. Receive Data PLC side Device
Set the device to read the data received from the master node.
<Data configuration>
The data of the size that is set by the "slave function reception bytes" area becomes valid.
Receive data buffer
Offset from head address
---Setting range---
Within the number of device points set in the PC parameter's device setting.
【#29086(PR)】 Slave Func. Transmit Data Module side Transfer Cont.
Set a write word count of the data to be transmitted to the master node.
The standard setting is "64".
---Setting range---
1 to 64
【#29087(PR)】 Slave Func. Transmit Data PLC side Device
Set the device which stores the data transmitted to the master data.
<Data configuration>
The data of the size that is set by the "slave function transmission bytes" area becomes valid.
Transmit data buffer
Offset from head address
---Setting range---
Within the number of device points set in the PC parameter's device setting.
366
Slave function receive data read device
0000 2nd byte 1st byte
H
4th byte 3rd byte
0001
H
128th byte 127th byte
003F
H
Slave function transmit data write word count
Slave function transmit data write device
2nd byte 1st byte
0000
H
4th byte 3rd byte
0001
H
128th byte 127th byte
003F
H