Setting The Date And Time - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
4 CNC CPU Initial Setup

4.4 Setting the Date and Time

Date and time settings on CNC CPU module are automatically sent to the GOT and PLC CPU.
(Note 1) This mode is enabled when [Clock setting] is set for [Time control] on GOT.
Refer to the manuals below for how to set [Time control].
For GT15: "GT15 User's Manual" (SH-080528)
For GT16: "GT16 User's Manual" (SH-080778)
(Note 2) Time setting on CNC CPU modules is immediately sent to PLC CPU, but it is reflected on GOT when the
power is turned ON again.
(1) Select [MONITOR]--->[COMMAND] to display the [COMMAND] screen. Scroll to the [TIME] page (3rd page).
(Note) As the CNC CPU memorizes the previously opened page, the order of screens displayed by function key
and page scroll key is not always the same.
(2) In "#( )", input the item number you wish to change, and input values in "DATA ( ) ( ) ( )".
(Note) Date is shown as Year/Month/Day.
86