Mitsubishi Electric C70 Setup Manual page 372

【#29036(PR)】 Cyclic Data:Area2 Other Node Area Module side Buffer off.
Cyclic data: Area2 Other node area Module side buffer offset
Set the head offset of the buffer used for reading the other node data in cyclic data area 2 (word
area).
The standard setting is "0".
(Note) An error will occur when the value buffer offset value exceeds "8192" after the transfer size is
---Setting range---
0 to 8192
【#29037(PR)】 Cyclic Data:Area2 Other Node Area PLC side Device
Cyclic data: Area2 Other node area CPU side device
Set the internal device used for reading the other node data in cyclic data area 2 (word area).
---Setting range---
Within the number of device points set in the PC parameter's device setting.
added.
C70 Setup Manual
Appendix 1.8 FL-net Parameters
355