Mitsubishi Electric C70 Setup Manual page 397

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#27021】 N [03] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
---Setting range---
0 to 99999
(Max. 5 digits including wildcard character ",".)
【#27022】 N [03] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
【#27031】 N [04] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
---Setting range---
0 to 99999
(Max. 5 digits including wildcard character ",".)
【#27032】 N [04] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
【#27041】 N [05] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
---Setting range---
0 to 99999
(Max. 5 digits including wildcard character ",".)
【#27042】 N [05] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
【#27051】 N [06] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
【#27052】 N [06] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
380