Configuring F1 Data Interfaces; Table 2-9 Parameters For Configuring F1 Data Interfaces - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Field
Selected Orderwire Port
Available Orderwire Port

2.12.2 Configuring F1 Data Interfaces

This topic describes the parameters that are used for configuring F1 data interfaces.
Table 2-9

Table 2-9 Parameters for configuring F1 data interfaces

Field
No.
Data Channel 1
Issue 02 (2011-06-30)
Value Range
Slot ID-Board Name-Port
No.(Port Name)
Available Orderwire Port
Default value: Bid-BidType-
PortID
list the parameters that are used for configuring F1 data interfaces.
Value Range
1-88
-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Creating the Network
Description
Specifies the port on the line
board for orderwire phone
transmission.
The Available Orderwire
Port parameter specifies
whether the optical interface
is used to make orderwire
calls.
You can click 7.105
Available Orderwire Port
to display the detailed
information.
Description
The No. (F1 Data Port)
parameter specifies the
numbers of the F1 data ports
that have the same direction.
You can click 7.106 No.(F1
Data Port) to display the
detailed information.
The Data Channel (F1 Data
Port) parameter specifies the
uplink and downlink ports
that pass through the F1
data. displays pass-through
channel 1, namely, the source
port of the data services at the
local station.
You can click 7.107 Data
Channel (F1 Data Port)
display the detailed
information.
to
2-39