Huawei OptiX OSN 550 Configuration Manual page 101

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Step 3 Check whether the services are configured correctly. For details, see Verifying the Correctness
of the SDH Service Configuration.
Step 4 Enable the performance monitoring function of the NEs. For details, see Setting Performance
Monitoring Parameters of an NE.
Step 5 Back up the configuration data of the NEs. For details, see Backing Up the NE Database to the
SCB Board.
----End
Relevant Task
If the services are configured incorrectly and thus need to be deleted, see Deleting SDH Services.
3.4.4 End-to-End Configuration Process
This topic describes how to configure the 11+1 linear MSP services.
Prerequisite
l
l
l
l
Procedure
Step 1 Choose Service > SDH Trail > Create SDH Trail from the Main Menu.
Step 2 Create the VC-4 service-layer trail.
1.
2.
3.
Step 3 Create VC12 services.
1.
Issue 02 (2011-06-30)
The physical network topology must be set up.
The NEs, boards, and fibers must be successfully created on the U2000.
The protection subnet must be created and must be the same as the actual topology. For
details about how to create the protection subnet, see
Protection Subnet.
The operator must understand the information provided in
Allocation.
Configure the parameters as follows. Set Level to VC4 Server Trail. The other parameters
take default values.
Double-click the source NE (NE1) and sink NE (NE2) on the right of the main topology
and click Apply. In the Operation Result dialog box indicating that the operation
succeeded, click Close.
Optional: In the Operation Result dialog box indicating that the operation succeeded,
click Browse Trail to query the created VC4 service-layer trail.
In Create SDH Trail, configure the parameters as follows. Set Level to VC12. The other
parameters take default values.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring SDH Services
2.6.4 Creating a Linear MS
3.4.2 Signal Flow and Timeslot
3-19