Enable Oam Protocol; Huawei Proprietary And Confidential Issue; Oam Working Mode - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Values
Valid Values
1-900, in step length of 1
Configuration Guidelines
None.
Relationship with Other Parameters
None.

7.47 Enable OAM Protocol

Description
The Enable OAM Protocol parameter specified whether the end-to-end OAM protocol
(namely, the IEEE 802.3ah protocol) is enabled at a port.
Impact on the System
The system operation is not affected.
Values
Valid Values
Enabled, Disabled
Configuration Guidelines
None.
Relationship with Other Parameters
None.

7.48 OAM Working Mode

Description
The OAM Working Mode parameter specifies a negotiation mode defined in IEEE 802.3ah. It
involves two modes: Passive and Active.
Issue 02 (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
2
Default Value
Disabled
7 List of Parameters
Unit
Second
7-43