Huawei OptiX OSN 550 Configuration Manual page 231

Multi-service cpe optical transmission system
Table of Contents

Advertisement

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
2.
Issue 02 (2011-06-30)
l Click the Flow Control tab. The parameters in the Flow Control tab page adopt the
default values.
l Click the TAG Attributes tab. After setting the parameters, click Apply.
Parame
Value in This Example Description
ter
TAG
PORT1: Access
PORT2: Access
Default
PORT1: 100
VLAN
PORT2: 200
ID
VLAN
PORT1: 0
Priority
PORT2: 0
Entry
PORT1: Enabled
Detectio
PORT2: Enabled
n
l Click the Advanced Attributes tab. The parameters in the Advanced Attributes tab
page adopt the default values.
Set the attributes of the internal port (VCTRUNK1 on the EFS8 board) used by the services
between user D1 and user D2 and between E1 and user E2.
l Select Internal Port.
l Click the TAG Attributes tab. After setting the parameters, click Apply.
Parame
Value in This Example Description
ter
TAG
VCTRUNK1: Tag Aware When the port is set to Tag Aware, all data
Default
-
VLAN
ID
VLAN
-
Priority
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring Ethernet Services
This parameter is set to Access if the Ethernet
equipment of user D1 and user E1 does not
support VLANs and if the transmitted
packets do not carry VLAN tags.
According to the plan, the VLAN ID is set to
100 on the transmission network side for
Ethernet services between user D1 and user
D2.
The VLAN ID is set to 200 on the
transmission network side for Ethernet
services between user E1 and user E2.
In this example, this parameter adopts the
default value.
If the equipment of users D1 and E1 does not
support VLANs, you need to enable the entry
detection function to detect wether the
received packets contain VLAN tags. In this
case, Entry Detection is set to Enabled.
frames transmitted and received at the port
must have VLAN tags. In this example,
TAG is set to Tag Aware.
When TAG is set to Tag Aware, you need
not set Default VLAN ID.
When TAG is set to Tag Aware, you need
not set VLAN Priority.
4-77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents